1 | Screw |
2 | Electrical connector |
3 | Screw |
4 | Bracket |
5 | Protective cover |
6 | Connector |
T2 | Ignition coil module |
L15.12-0006-05
| Remove | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
1 | Remove protective cover (5) | ||
2 | Disconnect electrical connector (2) at ignition coil module (T2) | ||
3 | Remove screws (3) and remove bracket (4) | ||
4 | Remove screw/bolts (1) | ||
5 | Remove ignition coil module (T2) towards front (arrow) from spark plugs | Long wedge | |
Check connectors (6) and springs for damage, corrosion and deformation, replace if necessary: | |||
| |||
| |||
| Install | ||
6 | Attach ignition coil module (T2) to spark plugs and uniformly press in | Ensure connector (6) is correctly seated. | |
7 | Screw in screws (1) until screw head is in contact with ignition coil module (T2) | ||
8 | Further screw in screws (1) alternately until ignition coil module (T2) is in contact with cylinder head so that free of tension | ||
9 | First tighten bracket (4) at ignition coil module (T2), then at cylinder head cover | | |
Screw/bolt, bracket to ignition coil module | |||
10 | Tighten screws (1) | Screw/bolt, ignition coil module to cylinder head | |
11 | Attach electrical connector (2) to ignition coil module (T2) | Ensure electrical connector (2) is correctly seated. | |
12 | Install protective cover (5) | ||
Catch tabs must engage audibly. |
115 589 03 59 00
Long wedge
Documente menționate
- ar1512l110001vb
- as0000z003501a Pericol de moarte în cadrul lucrărilor la componentele şi sistemele cu U >= 30 V tensiune alternativă (CA) respectiv cu U >= 60 V tensiune continuă (CC)