1 | Coolant inlet piping |
2 | Electric connection |
3 | Coolant inlet |
4 | Coolant outlet |
5 | Cooling outlet piping |
Y107 | AdBlue tank heating solenoid valve |
W14.40-1239-06
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
| Remove/install | ||
Warning | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue | Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
1 | Turn off ignition | ||
Topical note | Notes on coolant | ||
Notes on use, material properties and handling of AdBlue® | . | ||
2 | Relieve the cooling system pressure | ||
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
3 | Tilt the cabin | ||
Topical note | Notes on tilting the cab | . | |
4 | Loosen the electric connection (2) | Installation: Replace the cables crimp. | |
5 | Choke the pipes (1, 5) using a clamp | Clamp | |
6 | Loosen the pipes (1, 5) from the heating valve (Y107) | ||
7 | Remove the heating valve (Y107) | .SCR tank heating solenoid valve on support | |
8 | Install in reverse order | ||
9 | Starting engine | ||
10 | Check the tightness of the cooling system | Just visual inspection. |
000 589 54 37 00
Clamp
Documente menționate
- ah1440n000101a Indicaţii de utilizare, proprietăţi ale substanţei şi manipularea AdBlue
- ah2000n208001a Indicaţii pentru lichid de răcire
- ah6080n000301a Indicaţii pentru rabatarea cabinei şoferului
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as1440z000101a Pericol de arsuri şi opărire la lucrări la conductele de AdBlue şi la componente legate de acestea. Pericol de rănire a pielii şi ochilor la manipularea cu AdBlue. Pericol de intoxicare prin înghiţirea de AdBlue
- as2000z000101a Pericol de rănire la piele şi ochi prin opărire cu lichid de răcire fierbinte pulverizat afară. Pericol de otrăvire datorită înghiţirii lichid de răcire.
- as6080z000101a Pericol de rănire prin prinderea şi strivirea la basculare cabină şofer