ar1322g1202a

Removing and installing poly-V-belt

Tip ar · temă 13.22 · versiune 0100 · 1999-08-20

Valabil pentru: ENGINE 602.981

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 13 Compresor aer, transmisie prin curea › 13.22 Acţionare cu o curea — Seria 602 (modele 981)

EinPAS 15 Motor › 15.18 Antrenare curea › 15.18.30 Curea/Fulie de curea/Dispozitiv de întindere/Rolă de ghidare — Seria 602 (modele 981)

AR13.22-G-1202A

Removing and installing poly-V-belt

15.3.99

ENGINE 602.981

Removing and installing poly-V-belt

G13.22-3101-09

	Removing
1	Remove air hose (charge air distributor pipe to charge air cooler)
2	Release tension on poly V-belt
	Lever for pressing spring tensioning lever of the poly V-belt tensioning device		WF58.50-P-3902-01A
3	Remove poly V-belt	 Check belt pulley profile and tensioning device for damage and dirt and replace if necessary.
4	Check poly V-belt, damage patterns		AP13.22-G-1351-01A
	Installing
6	Mount poly V-belt	 Do not use belt wax or similar products.
		 Mount poly V-belt following the numbered sequence starting at the idler pulley 
		Poly V-belt flow diagram	AR13.22-G-3902-02A
			*BE13.22-N-1001-01C
7	Tension poly V-belt		AR13.22-G-3902-04A
	Lever for pressing spring tensioning lever of the poly V-belt tensioning device		WF58.50-P-3902-01A
8	Install air hose (charge air distributor pipe to charge air cooler)

Test values for single-belt drive

Number	Designation			Engine 602.981 with supercharger (compressed-air system)


BE13.22-N-1001-01C	Length of belt		mm	2100

Documente menționate