ar1322d1202tsv

Remove/install poly-V belt

Tip ar · temă 13.22 · versiune 0100 · 2018-05-04

Valabil pentru: Engine 642 in model 907

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 13 Compresor aer, transmisie prin curea › 13.22 Acţionare cu o curea — Seria 907

EinPAS 15 Motor › 15.18 Antrenare curea › 15.18.30 Curea/Fulie de curea/Dispozitiv de întindere/Rolă de ghidare — Seria 907

Valabil și pentru motoare/cutii de viteze: 642 ***

AR13.22-D-1202TSV

Remove/install poly-V belt

01.03.2018

Engine

642 in model 907

Remove/install poly-V belt

Shown except code HH4 (THERMOTRONIC automatic climate control), except code HH9 (TEMPMATIC semi-automatically controlled air conditioning) and without hydraulically supported steering gear

1

Poly-V-belt

2

Tensioning device

D13.22-1139-11

Remove

1

Remove fan shroud with fan

AR20.40-D-6800TSV

2

Loosen the poly-V belt (1)

AR13.22-D-3902-05TSV

Pin for locking poly-V belt tensioning device

WF58.50-S-1325-02S

3

Remove the poly-V belt (1)

Check

4

Check profiles of belt pulleys and poly-V-belt guide pulleys as well as tensioning device (2) for damage and contamination

If damage and/or contamination are present,

Replace affected components.

5

Check poly-V-belt (1) for wear and damage

AR13.22-D-1351TSR

If wear or damage are present,

Replace poly-V-belt (1).

Install

6

Install poly-V-belt (1) as per routing diagram

AR13.22-D-3902-02TSV


Ensure poly-V-belt (1) is correctly seated on belt pulleys, tensioner pulley of tensioning device (2) and poly-V-belt guide pulleys.
This prevents damage.


Belt pulleys, tensioner pulley of tensioning device (2) and poly-V-belt guide pulleys must be clean and free of grease.
This prevents damage and malfunctions.


Do not use belt wax or similar products.
This avoids malfunctions.

7

Tension poly-V belt (1)

AR13.22-D-3902-05TSV

Pin for locking poly-V belt tensioning device

WF58.50-S-1325-02S

8

Install fan shroud with fan

AR20.40-D-6800TSV

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Check for correct running of poly-V-belt (1) when the engine is running

Visual inspection only.

Documente menționate