T13.25-0007-11
1 Clamping bolt
2 Locknut
3 Tensioning nut
| Removing, installing | ||
1 | Open rear engine flap | ||
2 | Slacken attachment of additional flap on right and left | Open additional flap by lowering. | |
3 | Remove fan drive V-belt | ||
4 | Take off fan tensioning pulley V-belt drive | ||
5 | Remove generator V-belt | ||
6 | Slacken clamping bolt (1) | ||
7 | Slacken locknut (2) | ||
8 | Slacken tensioning nut (3) | ||
9 | Take V-belt off coolant pump | Installation: tension V-belt. | |
| Inspecting | ||
10 | Inspect condition of V-belt | See maintenance manual. | |
11 | Install in the reverse order | ||
12 | Inspect tension of V-belt | See maintenance manual. |