ar0941t8681bb

Remove/install charge air manifold

Tip ar · temă 09.41 · versiune 0104 · 2012-02-16

Valabil pentru: ENGINE 457.944 in MODEL NMB613.358 /388 ENGINE 457.942 in MODEL NMB671.015 /020 /021 /030 /042 /332 /333

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 09 Aspiraţie aer, supraalimentare › 09.41 Conductă aer supraalimentare/răcire aer supraalimentare — Seria 613 (modele 358, 388) · Seria 671 (modele 015, 020, 021, 030, 042, 332, 333)

EinPAS 15 Motor › 15.30 Aspirare aer/Supraalimentare › 15.30.33 Conductă de aspirație/Conductă aer supraalimentare — Seria 613 (modele 358, 388) · Seria 671 (modele 015, 020, 021, 030, 042, 332, 333)

Valabil și pentru motoare/cutii de viteze: 457 942, 457 944

AR09.41-T-8681BB

Remove/install charge air manifold

15.2.12

ENGINE 457.944 in MODEL NMB613.358 /388

ENGINE 457.942 in MODEL NMB671.015 /020 /021 /030 /042 /332 /333

Remove/install charge air manifold

T09.41-0038-06

Shown on engine 457.944

1 Charge air manifold

2 Electrical connector of boost pressure/charge air temperature sensor

4 Charge air pipe

Remove/Install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect electric cables at battery

Model 613.358/388

AR54.18-T-0002BA

Model 671.015/020/021/030/042/332/333

AR54.18-T-0002AA

Notes on battery

All models

AH54.10-P-0001-01A

2.1

Open left rear service flap

Model 671.015/020/021/030/042/332/333

3

Open rear tailgate

4

Remove interior compartment flap above engine

Model 613.358/388

AR88.40-T-1100-03BA

Model 671.015/020/021/030/042/332/333

AR88.40-T-1100-03AA

5

Remove charge air pipe (4)

Model 613.358/388

AR09.41-T-8681-01BA

Model 671.015/020/021/030/042/332/333

AR09.41-T-8681-01AA

*BA09.41-N-1001-01H

*BA09.41-N-1002-01H

6

Remove intake hose for compressor

7

Remove bracket for engine wiring harness

8.1

Take off start/stop switch

Model 671.015/020/021/030/042/332/333

8

Unlock and separate electrical connector of boost pressure/charge air temperature sensor (2)

9

Detach charge air manifold (1) from cylinder head

Installation: Clean sealing surfaces, replace gaskets.

*BA09.41-N-1003-01H

10

Install in the reverse order

Charge air pipe/charge air cooling

Number

Designation

Engine
457.9

BA09.41-N-1001-01H

Clamp of charge air hose to charge air pipe

M5

Nm

8

M6

Nm

10

BA09.41-N-1002-01H

Bolt of charge air pipe to charge air manifold

Nm

60

BA09.41-N-1003-01H

Bolt of charge air manifold to cylinder head

Nm

30

Documente menționate