ar0910b8250b

Detach, attach air intake duct

Tip ar · temă 09.10 · versiune 0100 · 2016-02-12

Valabil pentru: Cumbustion engine 376 with Vehicle 386.367, 384.114, 384.145, 386.024, 386.025, 386.027, 386.045Cumbustion engine 376.945 with Vehicle 384.009, 384.047, 386.014, 386.015, 386.043Cumbustion engine 376.946 with Vehicle 386.364Cumbustion engine 377 with Vehicle 694.004, 694.024, 694.041, 694.047, 695.039, 695.056, 695.014, 695.016, 695.043, 695.013, 695.015, 695.301

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 09 Aspiraţie aer, supraalimentare › 09.10 Filtru de aer — Seria 376 · Seria 384 (modele 009, 047, 114, 145) · Seria 386 (modele 014, 015, 024, 025, 027, 043, 045, 364, 367) · Seria 694 (modele 004, 024, 041, 047) · Seria 695 (modele 013, 014, 015, 016, 039, 043, 056, 301)

EinPAS 15 Motor › 15.30 Aspirare aer/Supraalimentare › 15.30.33 Conductă de aspirație/Conductă aer supraalimentare — Seria 376 · Seria 384 (modele 009, 047, 114, 145) · Seria 386 (modele 014, 015, 024, 025, 027, 043, 045, 364, 367) · Seria 694 (modele 004, 024, 041, 047) · Seria 695 (modele 013, 014, 015, 016, 039, 043, 056, 301)

Valabil și pentru motoare/cutii de viteze: 377 ***

AR09.10-B-8250B

Detach, attach air intake duct

12.02.16

Cumbustion engine 376 with Vehicle 386.367, 384.114, 384.145, 386.024, 386.025, 386.027, 386.045

Cumbustion engine 376.945 with Vehicle 384.009, 384.047, 386.014, 386.015, 386.043

Cumbustion engine 376.946 with Vehicle 386.364

Cumbustion engine 377 with Vehicle 694.004, 694.024, 694.041, 694.047, 695.039, 695.056, 695.014, 695.016, 695.043, 695.013, 695.015, 695.301

Detach, attach air intake duct

B09.10-0060-08

1 Turbocharger

2 Turbocharger connection flexible tubes

3 Tubes clamp

4 Flexible air compressor flexible intake hose

5 Intermediate plastic box

6 Fixation screws

7 Air filter outlet flexible hose

8 Clamps

9 Air filter mouth

Remove and install

Danger!

Risk of accident by the accidental movement when the engine is operating. Risk of injury by being smashed and burns due to contact during the start up procedure or with the engine in operation

Ensure that the vehicle is prevented to make any non-voluntary movement. Use closed and well tight work clothes. Do not touch heated or moving parts.

AS00.00-B-0005-01A

1

Disconnect the battery's negative wire or shutdown the general switch.

Unfasten the negative longitudinal girder cable bolt avoiding to unfasten it at the battery's terminals.

2

Tilt the hood and lock it with the safety lock.

AR88.40-B-1000A

3

Release the clamp and disconnect the air compressor intake hose (4).

Install: Check the condition of the hose and clamp, if necessary replace them.

4

Unfasten the clamp (3) at the place of the turbocharger (1), at the intermediate plastic box (5) and remove the flexible tubes (2).

Install: Check the flexible tubes condition (2) and the clamps (3), if necessary, replace them.

Cover the turbocharger mouth with an appropriate plastic cap.

5

If necessary, remove the intermediate plastic box (5).

Remove the bolts (6) that fasten the box to the longitudinal member.

Install: Pay attention to the moderate tightening of the bolts (6) at the plastic flaps of the intermediate box.

6

Install in the reverse order.

During the installation, take care to have all the components of the tubes totally clean.

7

Check the air filter's condition.

Replace the filtering element.

8

Actuate the engine and check its tightness.

Documente menționate