ar0715g200006dd

Install, remove fuel return line at unit pumps

Tip ar · temă 07.15 · versiune 0102 · 2019-10-04

Valabil pentru: Engine 900.91/92 in model 000.001 Engine 902.91/93 in model 000.001 Engine 904.94/95/96/97 in model 000.001 Engine 906.93/94/95/96/98/99 in model 000.001 Engine 924.91/93/94 in model 000.001 Engine 925.9 in model 000.001 Engine 926.91/92/93/95/97/98 in model 000.001

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 07 Pregătirea amestecului › 07.15 Sistem de injecţie Diesel (PLD), reglare motor (MR) — Seria 000 (modele 001) · Seria 900 (modele 91*, 92*) · Seria 902 (modele 91*, 93*) · Seria 904 (modele 94*, 95*, 96*, 97*) · Seria 906 (modele 93*, 94*, 95*, 96*, 98*, 99*)

EinPAS 15 Motor › 15.45 Management motor › 15.45.13 Conductă/Furtun/Supapă — Seria 000 (modele 001) · Seria 900 (modele 91*, 92*) · Seria 902 (modele 91*, 93*) · Seria 904 (modele 94*, 95*, 96*, 97*) · Seria 906 (modele 93*, 94*, 95*, 96*, 98*, 99*)

Valabil și pentru motoare/cutii de viteze: 924 91*, 924 93*, 924 94*, 925 9**, 926 91*, 926 92*, 926 93*, 926 95*, 926 97*, 926 98*

AR07.15-G-2000-06DD

Install, remove fuel return line at unit pumps

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Note on calculation of tightening torque when using insertion or socket tools with various effective lengths

AH00.00-P-0015-01CW

Fuel return lines of unit pumps for compression test

WF58.50-G-0001-02DD

Engine

900.91/92 in model 000.001

Engine

902.91/93 in model 000.001

Engine

904.94/95/96/97 in model 000.001

Engine

906.93/94/95/96/98/99 in model 000.001

Engine

924.91/93/94 in model 000.001

Engine

925.9 in model 000.001

Engine

926.91/92/93/95/97/98 in model 000.001

Diesel injection system with unit pumps (MR/PLD)

Number

Designation

Engine 900.9, 902.9 (except 902.90), 904.9, 906.9 (except 906.90) in model 000.001

Engine 924.9, 925.9, 926.9 in model 000.001

BA07.15-N-1004-01D

Injection line to connection fitting and unit pump (MR/PLD)

Nm

35

35

Install, remove fuel return line at unit pumps
Install, remove fuel return line at unit pumps
Install, remove fuel return line at unit pumps

000 589 07 03 00

Ring wrench

000 589 68 03 00

Box wrench bit

000 589 40 37 00

Clamp

Attach, remove

Install, remove fuel return line at unit pumps

1

Attach line pieces (1) for prefabricated fuel return line (2) to unit pumps   .


Use box wrench bit and box wrench to tighten and loosen line pieces (1).



2

Appropriately clamp off the fuel return line (2) using a clamping device (3).



3

Open cap on fuel tank.



4

Lead the long hose piece (5) in the fuel tank.


Do not route the measuring hose (5) close to hot and rotating parts.



5

Remove in the reverse order.


G07.15-3195-05

Documente menționate