1 | Bolts |
2 | Electrical connectors |
N3/9 | CDI control unit |
P07.08-A018-05
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Notes on safety-relevant components | |||
| Remove/install | ||
1 | Connect vehicle diagnosis system and perform commissioning of CDI control unit (N3/9). | If the CDI control unit (N3/9) has been replaced. | |
| |||
2 | Remove ground line of battery. | ||
3 | Remove bolts (1). | Bolt, CDI control unit to air filter housing | |
4 | Release and disconnect electrical connectors (2). | ||
5 | Remove CDI control unit (N3/9). | ||
| Check | ||
6 | Check the seal in the air filter housing for damage. | If damage is identified, | |
| |||
replace the seal in the air filter housing. | |||
7 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Perform an engine test run and check the engine for proper function. |
Documente menționate
- ad0000p200006mfa
- ah0000p500001a Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor străine
- ah0000z001901a Indicaţii referitoare la componente relevante din punct de vedere al siguranţei
- ah5400p000101a Indicaţii pentru evitarea defectării componentelor electronice prin descărcare electrostatică
- ar5410p0003mfa
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare