1 | Electrical connections |
2 | Electrical wiring harnesses |
3 | Screw/bolts |
N3/9 | CDI control unit |
P07.08-2235-11
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Connect diagnostic system and read out variant coding of the CDI control unit (N3/9) | When replacing the CDI control unit (N3/9) | |
| |||
2 | Detach ground line from on-board electrical system battery | ||
| Notes on battery | ||
3 | Remove engine cover | Installation: Ensure correct seating. | |
4 | Unhook electrical wiring harness (2) on air filter housing (arrows) | ||
5 | Unlock and disconnect electrical connections (1) and detach from CDI control unit (N3/9) | ||
6 | Remove screw/bolt (3) | ||
7 | Remove CDI control unit (N3/9) | Installation: Replace seal between CDI control unit (N3/9) and air filter housing. | |
8 | Install in the reverse order | ||
9 | Perform commissioning of the CDI control unit (N3/9) | When replacing the CDI control unit (N3/9) | |
| |||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Carry out an engine test run |
Documente menționate
- ad0000p200004b
- ah5400p000101a Indicaţii pentru evitarea defectării componentelor electronice prin descărcare electrostatică
- ah5410p000101a Indicaţii pentru acumulator
- ah5410p000101a
- ar5410p0003lf Deconectare, conectare cablu de masă acumulator
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare