S07.04-4716-08
1 | Electrical connector | 3 | Electrical line | |
2 | Bracket | 4 | Oxygen sensor downstream of catalytic converter |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Special instructions for lifting and supporting vehicle | ||
| Remove/install | ||
1 | Raise vehicle | ||
2 | remove electrical connection (1) from bracket (2) | ||
3 | Disconnect electrical connection (1) | ||
4 | Remove electric line (3) from holder (2) | ||
5 | Remove lambda sensor downstream of catalytic converter (4) | Installation: Apply heat-resistant lubricating paste to thread of lambda sensor downstream of catalytic converter (4). | |
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Oxygen sensor downstream of catalytic converter at exhaust pipe | |||
Tool kit | |||
Torque wrench | |||
6 | Cover the sensor tip of the lambda sensor downstream of catalytic converter (4) with a clean protective cover | If the lambda sensor downstream of catalytic converter (4) is to be reused. | |
Set of protective caps | |||
7 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Check leaktightness of exhaust system when engine is running | Visual inspection only. |
001 589 66 21 00
Torque wrench
000 589 10 99 00
Tool kit
001 589 00 91 00
Set of protective caps
Documente menționate
- ah0060n010001p Indicaţii pentru ridicare şi aşezarea pe cric
- ar0060s100004p
- as0000z000201a Pericol de rănire la piele şi ochi prin manipulare cu obiecte fierbinţi sau incandescente
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z001001a Pericol de moarte prin alunecare sau basculare a autovehiculului de pe elevator
- as4900z000101a Pericol de ardere, asfixiere şi de intoxicare în cadrul lucrărilor la instalaţia de gaze arse şi la componentele aferente. Pericol de asfixiere şi pericol de intoxicare prin inhalare de componente gazoase şi solide ale gazelor arse.