Test valve springs

AR05.30-T-3010CB

Test valve springs

14.5.03

ENGINE 457.941 in MODELNMB613.368

ENGINE 457.944 in MODELNMB613.367

D05.30-0067-05

1 Valve spring

2 Spring test balance

	Remove
1	Remove cylinder head	On model 613.367	AR01.30-T-5800CB
		On model 613.368	AR01.30-T-5800CA
2.1	Remove valve springs	 With valve lifter and adapter	AR05.30-T-3510-03BBB
			*116589066300
			*442589003100
			*904589003100
			*WH58.30-Z-1001-14A
2.2	Remove valve springs	With valve tool case	AR05.30-T-3510-03BB
			*541589006100
	Testing
3	Clean valve springs (1) and insert into the spring test balance (2)		*WH58.30-Z-1005-05A
4	Inspect valve springs (1) to the specifications with the spring test balance (2)		*WH58.30-Z-1005-05A
		 If the specifications are not achieved, the valve springs must be replaced.	*BE05.30-N-1001-05F
	Install
5.1	Install valve springs	 With valve lifter and adapter	AR05.30-T-3510-03BBB
			*116589066300
			*442589003100
			*904589003100
			*WH58.30-Z-1001-14A
5.2	Install valve springs	With valve tool case	AR05.30-T-3510-03BB
			*541589006100
6	Install cylinder head	On model 613.367	AR01.30-T-5800CB
		On model 613.368	AR01.30-T-5800CA

Inspection data of valve springs

Number	Designation			Engine 457.9


BE05.30-N-1001-05F	Inlet and exhaust valve springs	Length untensioned	mm	69,7
		Length when tensioned with 382 up to 418 N	mm	49
		Length when tensioned with 644 up to 706 N	mm	37
		Wire Ø	mm	4,2
		Inner Ø	mm	28,9
		Outer Ø	mm	24.5...24.9

442 589 00 31 00

Valve tool case

Valve lifter

Magnet finger

Adapter piece

116 589 06 63 00

541 589 00 61 00

904 589 00 31 00

Commercially available tools

Number	Designation
WH58.30-Z-1005-05A	Spring balance
WH58.30-Z-1001-14A	Cylinder head holding fixture