ar0520b6010b

Check basic position of camshafts

Tip ar · temă 05.20 · versiune 0100 · 2016-02-12

Valabil pentru: Cumbustion engine 612 with Vehicle 979.013, 979.016

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 05 Distribuţia motorului › 05.20 Axă cu came, reglarea axelor cu came — Seria 979 (modele 013, 016)

EinPAS 15 Motor › 15.17 Distribuție › 15.17.30 Distribuție a supapelor — Seria 979 (modele 013, 016)

Valabil și pentru motoare/cutii de viteze: 612 ***

AR05.20-B-6010B

Check basic position of camshafts

12.02.16

Cumbustion engine 612 with Vehicle 979.013, 979.016

Check basic position of camshafts

D05.20-1101-06

1 Intake valve camshaft

2 Exhaust valve camshaft

3  Locking pins

A Hole

B Adjusting holes

	Remove and install
1	Removing the cylinder head cover		AR01.20-B-5014H
2	Place the first cylinder piston in the combustion TDC.	Rotate the engine by its crankshaft in the engine operating direction (clockwise).Do not rotate the engine by the camshaft nor counterclockwise.
3	Lock the intake valve camshaft with the locking pin (3).	 Locking pins	*111589031500
		 Insert the locking pin (3) in the intake valve camshaft gear through the hole (A) in the first camshaft bearing cap.
	Check
4	Check the basic position of the camshafts.	 The holes (B) of the camshaft gears (1, 2) will have to be aligned, as well as, the markings on the camshafts and of the bearing caps (arrows). If necessary 
		Correct the basic position of the camshafts.	AR05.20-B-6025A
5	Install in reverse order.

Check basic position of camshafts

111 589 03 15 00

Locking pins

Documente menționate