2 | Tensioning rail |
5 | Top slide rail |
6 | Lower slide rail |
7 | Slide rail pins |
P05.20-2395-12
| Remove/install | ||
1 | Remove cylinder head cover | ||
Installation: Only install upper engine cover after the leak test. | |||
2 | Remove upper slide rail (5) from cylinder head cover | ||
3 | Remove timing case cover | When removing the lower slide rail (6). | |
4 | Remove cylinder head | When removing the lower slide rail (6). | |
5 | Remove lower slide rail (6) from slide rail pins (7) | When removing the lower slide rail (6). | |
| Check | ||
6 | Check tensioning rail (2) for wear and damage | For wear or damage | |
| |||
Replace tensioning rail (2). | |||
7 | Check upper and lower slide rail (5, 6) for wear and damage | For wear or damage | |
| |||
Replace upper and lower slide rail (5, 6). | |||
8 | Install in the reverse order | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear buttoned-up and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Carry out an engine test run, checking the engine for proper operation and leaktightness | ||
10 | Install upper engine cover |
Documente menționate
- ar0120p5014mrd
- ar0130p5800mrd
- ar0140p8000mrd
- ar0510p8510mrd
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare