ar0500p2011mrh

Remove/install hydraulic valve clearance compensating elements

Tip ar · temă 05.00 · versiune 0101 · 2018-12-14

Valabil pentru: Engine 264 in model 213, 238, 257

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 05 Distribuţia motorului › 05.00 Generalităţi — Seria 213 · Seria 238 · Seria 257

EinPAS 15 Motor › 15.17 Distribuție › 15.17.30 Distribuție a supapelor — Seria 213 · Seria 238 · Seria 257

Valabil și pentru motoare/cutii de viteze: 264 ***

AR05.00-P-2011MRH

Remove/install hydraulic valve clearance compensating elements

01.12.2018

Engine

264 in model 213, 238, 257

Remove/install hydraulic valve clearance compensating elements

1

Roller-type cam follower

2

Valve clearance compensating element

3

Clamp

P05.00-2048-02

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove corresponding camshaft

AR05.20-P-6992MRH

2

Mark roller-type rocker arms (1) and valve clearance compensating elements (2) relative to respective cylinder head

If reusing roller-type rocker arms (1) and valve clearance compensating elements (2).


If reusing roller-type rocker arms (1) and valve clearance compensating elements (2), install these in the same place as previously.
Engine damage can occur otherwise.

3

Remove roller-type rocker arms (1) including valve clearance compensating elements (2)

Specified engine oils (service) - Overview

BB00.40-P-0223-02A

Installation: Wet roller-type rocker arms (1) and valve clearance compensating elements (2) using engine oil.

4

Remove clamps by hand and remove valve clearance compensating elements (2) from roller-type rocker arms (1)

Check

5

Check valve clearance compensating elements (2) for proper function and install new ones if necessary

It should not be possible to press the valve clearance compensating elements (2) together with normal force of the hand and they should move together only very slowly when great pressure is applied.

If a number of valve clearance compensating element (2) are defective.

Check oil pressure.


AR18.00-P-1250MRH

6

Install in the reverse order

Documente menționate