S03.30-4541-78
1 | Poly-V-belt | 3 | Center bolt | |
2 | Belt pulley | 4 | Woodruff key |
| Remove/install | ||
1 | Remove poly-V-belt (1) from belt pulley (2). | ||
2 | Install retaining lock for crankshaft / starter ring gear. | ||
3 | Remove center bolt (3). | ||
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
Bolt, belt pulley with vibration damper to crankshaft | |||
Socket wrench bit | |||
4 | Remove belt pulley (2). | Installation: The installation position is defined by the Woodruff key (4) of the crankshaft and the groove on the belt pulley (2). | |
| Check | ||
5 | Check belt pulley (2) for damage and galling. | If there is a problem, | |
| |||
Replace belt pulley(2). | |||
6 | Check front radial shaft sealing ring for damage. | If there is a problem, | |
| |||
Replace front radial shaft sealing ring. | |||
7 | Install in the reverse order. |
001 589 65 09 00
Socket wrench bit
Documente menționate
- ah0000n000101a Indicaţii pentru şuruburile şi piuliţele autoblocante
- ah0000p002001a Indicaţii referitoare la îmbinările filetate, care au fost realizate conform procedeului de strângere în funcţie de unghiul de rotire
- ar0320s3004ps
- ar0330s5000ps
- ar1322s1202ps