1 | Center bolt |
2 | Belt pulley/vibration damper |
3 | Key |
4 | Crankshaft gear |
P03.30-2232-06
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove poly-V-belt. | ||
Installation: Only install lower engine compartment paneling after leak test. | |||
2 | Install retaining lock for crankshaft or starter ring gear. | ||
3 | Remove center bolt (1). | ||
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
Installation: Install new central bolt (1). | |||
Central bolt of vibration damper | |||
4 | Detach the pulley / vibration damper (2) from the crankshaft. | Installation: Place the pulley / vibration damper (2) on the crankshaft. Rotate to ensure that the key (3) on the crankshaft gear (4) engages in the groove on the pulley / vibration damper (2). | |
5 | Check the area around the crankshaft gear (4) for leakage. | If there is a problem, | |
| |||
Replace the front radial shaft sealing ring on the crankshaft. | |||
6 | Install in the reverse order. | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Perform an engine test run; check the engine for leak-tightness and proper function. | ||
8 | Install lower engine compartment lining. |
Documente menționate
- ah0000p002001a Indicaţii referitoare la îmbinările filetate, care au fost realizate conform procedeului de strângere în funcţie de unghiul de rotire
- ah0000p500001a Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor străine
- ar0320p3004mfe
- ar0330p5000mfe
- ar1322p1202mfe
- ar6120p1105mfe
- as0000z000201a Pericol de rănire la piele şi ochi prin manipulare cu obiecte fierbinţi sau incandescente
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z000901a Pericol de rănire prin prinderea sau strivirea, în caz extrem prin tăierea membrelor în timpul manipulării sistemului mecanic
- as0000z001701a Pericol de rănire prin tăieturi respectiv zgârieturi provocate de componentele cu muchii ascuţite ale autovehiculului