ar0330p1600lfd

Remove/install belt pulley/vibration damper

Tip ar · temă 03.30 · versiune 0100 · 2013-04-12

Valabil pentru: ENGINE 642 in MODEL 222

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 03 Mecanism de acţionare › 03.30 Volantă, disc antrenor, amortizor vibraţii, bendix — Seria 222

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.41 Arbore cotit/Volantă/Flanșă de antrenare — Seria 222

EinPAS 15 Motor › 15.18 Antrenare curea › 15.18.30 Curea/Fulie de curea/Dispozitiv de întindere/Rolă de ghidare — Seria 222

Valabil și pentru motoare/cutii de viteze: 642 ***

AR03.30-P-1600LFD

Remove/install belt pulley/vibration damper

18.03.2013

ENGINE

642 in MODEL 222

Remove/install belt pulley/vibration damper

1

Belt pulley/vibration damper

2

Center bolt

P03.30-2180-06

Remove/install

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

1

Remove fan unit

AR20.40-P-5050LF

2

Detach charge air cooler and place to one side with attached coolant lines

AR09.41-P-6819LFD

3

Only detach poly-V belt from belt pulley/vibration damper.

AR13.20-P-0001LFD

4

Install retaining lock for crankshaft/starter ring gear

AR03.30-P-5000SXI

5

Remove the center bolt (2) for the belt pulley/vibration damper (1)

Center bolt, vibration damper

*BA03.30-P-1001-01G

6

Detach belt pulley/vibration damper (1) from crankshaft

Installation: The installation position is defined by the feather key of the crankshaft and the groove on the belt pulley/vibration damper.

Check

7

Check freewheel for the belt pulley/vibration damper (1) and check belt pulley/vibration damper (1) for damage; replace if necessary

8

Check front crankshaft radial sealing ring; replace if necessary

AR03.20-P-3000LFD

9

Install in the reverse order

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

10

Perform an engine test run and check engine for leaktightness

When replacing crankshaft radial sealing ring.

Flywheel, drive plate, vibration damper, starter ring gear

Number

Designation

ENGINE 642

BA03.30-P-1001-01G

Center bolt, vibration damper

Stage 1

Nm

200

Stage 2

°

90

Stage 3

°

90

Documente menționate