ar0320b0002tj

Additional testing during an engine repair on the crankshaft, on main bearing and connecting rod bearing

Tip ar · temă 03.20 · versiune 0103 · 2019-11-29

Valabil pentru: Engine 924.9 in model 958.0/1 Engine 926.9 in model 958.0/1 Engine 926.9 in model 958.2

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 03 Mecanism de acţionare › 03.20 Arbore cotit — Seria 958 (modele 0**, 1**, 2**)

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.41 Arbore cotit/Volantă/Flanșă de antrenare — Seria 958 (modele 0**, 1**, 2**)

Valabil și pentru motoare/cutii de viteze: 924 9**, 926 9**

AR03.20-B-0002TJ

Additional testing during an engine repair on the crankshaft, on main bearing and connecting rod bearing

28.11.2019

Engine

924.9 in model 958.0/1

Engine

926.9 in model 958.0/1

Engine

926.9 in model 958.2

Inspect

1

Remove the oil filter element and check the outer segments of the oil filter element for metal chips and other evidence

.

AP18.00-B-0101TB

Only in case of extreme wear or damage to parts of the engine.

2

Replace the oil/water heat exchanger

Only in case of metal chips found in the segments of the oil filter element or in the motor oil circuit.

Engine 924.9,

AR18.30-B-6840TJA

Engine 926.9

AR18.30-B-6840TJ

3

Remove the oil pump, disassemble it and visually check for wear or damage


.

AR18.10-B-6020TJ

Remove only if metal chips are found in the oil filter element.

4

Fuel the oil installation

Only if engine has been repaired due to damage in the crankshaft bearings.

5

Change the engine oil and the oil filter element

.

AP18.00-B-0101TB

If metal chips or other evidence are found (coolant in the engine oil circuit).

Documente menționate