P01.45-2222-11
Shown on engine 135.9
1 Oil pan
2 Bolt
3 Transmission cover
4 Bolt
| Remove/install | ||
1 | Drain engine oil | Installation: Replace engine oil and oil filter. | |
| Engine oil and filter change | ||
2 | Unscrew bolts (2) of transmission cover (3) | ||
3 | Remove transmission cover (3) | ||
4 | Unscrew bolts (4) at circumference of oil pan (1) from the crankcase | | |
5 | Carefully detach oil pan (1) from crankcase using a rubber mallet and remove | Installation: Clean sealing surfaces, coat sealing surface of crankcase with sealing compound. | |
Sealing compound | |||
| Notes on application of sealant to oil pan | ||
6 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine | Secure vehicle to prevent it from moving. | |
7 | Perform engine test run and check engine around oil pan (1) for leaks |
Oil pan
Number | Designation | Engine | Engine | ||
BA01.45-P-1001-01L | Torx bolt, oil pan to crankcase | Nm | 8 | 8 | |
Oil pan
Number | Designation | Engine | Engine | ||
BA01.45-P-1001-01L | Torx bolt, oil pan to crankcase | Nm | 8 | 8 | |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1053-01A | Sealing compound | Q0000282V000000000 |
Documente menționate
- ap1800p0101ff
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare