343 589 00 40 00
Gauge stand
Dial gauge
001 589 53 21 00
Measurement with liner collar seat turning tool with measuring point
1 Mount dial gage holder together with dial gage onto the plane face of the turning tool and position tracer pin of dial gage at liner collar (arrow) (Fig. A).
Use dial gage with an extension.
2 Produce a preload of 3-4 mm at dial gage , then set the scale of dial gage to '0'.
3 Mount tracer pin of dial gage onto separating surface at crankcase (arrow) and read off depth of collar seat (Fig. B).
Measurement with liner collar seat turning tool without measuring point
1 Take off turning tool about 0.3 mm before the calculated liner collar seat depth is reached.
2 Mount the dial gage holder together with dial gage onto cylinder head separating surface and position tracer pin of dial gage at liner collar (arrow).
3 Produce a preload of 3-4 mm at dial gage , then set the scale of dial gage to '0'.
T01.40-0034-03
4 Position tracer pin of dial gage onto separating surface at crankcase (arrow) and read off depth of collar seat.