ar0140p8920ff

Remove/install end cover together with shaft seal

Tip ar · temă 01.40 · versiune 0103 · 2007-01-17

Valabil pentru: ENGINE 134.9, 135.9 in MODEL 454.0

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 01 Motor complet, sistem de ventilaţie motor, chiulasă, carter motor › 01.40 Carter motor, capac carcasă distribuţie, capac de închidere — Seria 454 (modele 0**)

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.31 Bloc motor/Separator ulei/Aerisire — Seria 454 (modele 0**)

Valabil și pentru motoare/cutii de viteze: 134 9**, 135 9**

AR01.40-P-8920FF

Remove/install end cover together with shaft seal

8.1.07

ENGINE 134.9, 135.9 in MODEL 454.0

Remove/install end cover together with shaft seal

P01.40-2138-11

1 Bolts

2 End cover

3 Radial shaft seal

 	Remove/install
1	Remove flywheel		AR03.30-P-8002FF
2	Remove bolts (1)		*BA01.40-P-1008-01O
3	Loosen end cover (2) from crankcase and remove	 Installation: Clean sealing surfaces. Apply Sealant and apply engine oil to radial shaft sealing ring (3). Position sleeve on crankshaft and end cover (2) on crankcase.
			*454589021400
		Sealant	*BR00.45-Z-1053-01A
	Notes on application of sealant to end cover with radial shaft seal		AH01.40-P-1000-06FF
4	Install in the reverse order

 Timing case cover

Number	Designation			Engine 134.910	Engine 134.911


BA01.40-P-1008-01O	Bolt connecting end cover of radial shaft sealing ring to the crankcase		Nm	8	8

 Timing case cover

Number	Designation			Engine 135.930	Engine 135.950


BA01.40-P-1008-01O	Bolt connecting end cover of the radial shaft sealing ring to the crankcase		Nm	8	8

Remove/install end cover together with shaft seal

Sleeve

454 589 02 14 00

Repair materials

Number	Designation	Order number
BR00.45-Z-1053-01A	Sealant	Q0000282V000000000

Documente menționate

ar0330p8002ff