ar0130b580001b
Tightening procedure for cylinder head bolts
Tip ar · temă 01.30 · versiune 0201 · 2019-10-16
Valabil pentru: Engine 904, 906, 924, 926 in model 368, 382, 384, 634, 685.282/284/289/290 Engine 904, 906, 924, 926 in model 693
Nu este disponibil în „ro”; afișat în Engleză.
Încadrare
Grupă funcțională 1 Motor › 01 Motor complet, sistem de ventilaţie motor, chiulasă, carter motor › 01.30 Chiulasă — Seria 368 · Seria 382 · Seria 384 · Seria 634 · Seria 685 (modele 282, 284, 289, 290) · Seria 693 · Seria 904 · Seria 906
EinPAS 15 Motor › 15.16 Chiulasă › 15.16.31 Chiulasă/Garnitură chiulasă — Seria 368 · Seria 382 · Seria 384 · Seria 634 · Seria 685 (modele 282, 284, 289, 290) · Seria 693 · Seria 904 · Seria 906
Valabil și pentru motoare/cutii de viteze: 924 ***, 926 ***
AR01.30-B-5800-01B
| Tightening procedure for cylinder head bolts
| Engine 904.9, 906.9, 924.9, 926.9
|
|
Engine
| 904, 906, 924, 926 in model 368, 382, 384, 634, 685.282/284/289/290
|
Engine
| 904, 906, 924, 926 in model 693
|
Number
| Designation
|
|
| Engine 904.9, 906.9
| Engine 924.9, 926.9
|
BA01.30-B-1002-01C
| Crankcase bolt
| 1st stage
| Nm
| 20
| 20
|
|
|
| 2nd stage
| Nm
| 70
| 70
|
|
|
| 3rd stage
| Nm
| 170
| 170
|
|
|
| 4th stage
| Nm
| 280
| 280
|
|
|
| 5th stage
| Graus
| 90
| 90
|
|
|
| 6th stage
| Graus
| 90
| 90
|
1
| Tighten the bolts of the head using the socket.
|
|
| Note the tightening sequence indicated in the figure.
|
|
| If the bolt tightening torque is exceeded, remove it, check the maximum allowable length (replace if necessary), and tighten it from the 1st step.
|
|
| Replacing the bolts whose length exceeds the maximum allowable value is mandatory.
|
|
| Do not retighten the bolts on the cylinder head.
|
