Removing, installing oil filler neck together with oil separator

Tip ar · temă 01.20 · versiune 0100 · 2005-07-12

Valabil pentru: ENGINE 447, 489 in MODEL 671

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 01 Motor complet, sistem de ventilaţie motor, chiulasă, carter motor › 01.20 Sistem de ventilaţie motor, capac chiulasă — Seria 447 · Seria 671

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.31 Bloc motor/Separator ulei/Aerisire — Seria 447 · Seria 671

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.43 Baie de ulei/Ştuţ de umplere — Seria 447 · Seria 671

Valabil și pentru motoare/cutii de viteze: 489 ***

AR01.20-T-9540A

Removing, installing oil filler neck together with oil separator

14.5.98

ENGINE 447, 489 in MODEL 671

Removing, installing oil filler neck together with oil separator

T18.00-0001-11

1 Dipstick bracket

2 Oil filler neck

3 Bolts of oil filler neck to crankcase

T01.10-0001-11

2 Oil filler neck

4 Crankcase ventilation hose

5 Oil separator

6 Union nut

 	Removing, installing
1	Unbolt bracket of dipstick (1) at oil filler neck (2)
2	Detach hose of crankcase ventilation (4) at oil separator (5)
3	Detach oil filler neck at crankcase	 Unscrew bolts of oil filler neck at crankcase (3) for this step
			*BA01.20-N-1001-02B
4	Detach dipstick at oil filler neck (2)	 Unscrew union nut (6)
5	Take off oil filler neck together with oil separator
6	Install in the reverse order

 Oil filler neck

Number	Designation		Engine 447	Engine 489


BA01.20-N-1001-02B	Bolt of oil filler neck to engine housing block	Nm	25	25