ar0100p0100gy

Crank engine

Tip ar · temă 01.00 · versiune 0104 · 2020-02-24

Valabil pentru: Engine 273 in model 463 Engine 642 in model 461, 463

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 01 Motor complet, sistem de ventilaţie motor, chiulasă, carter motor › 01.00 Generalităţi — Seria 461 · Seria 463

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.15 Motor cu ardere internă complet — Seria 461 · Seria 463

Valabil și pentru motoare/cutii de viteze: 273 ***, 642 ***

AR01.00-P-0100GY

Crank engine

12.12.2019

Engine

273 in model 463

Engine

642 in model 461, 463

Modification notes

09.12.2019

Document completely revised.

Crank engine

P01.00-2687-08

1

Torque converter cover

3

Ring gear

2

Screwdriver

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Lift vehicle with lifting platform.

AR00.60-P-1006A

2

Remove torque converter cover (1) at transmission bell housing.

3

Crank engine in increments using a wide screwdriver (2) in direction of rotation.


Turn engine only in direction of rotation.
Engine damage can occur otherwise.

Position blade of screwdriver (2) at ring gear (3) and support against wall of transmission bell housing.

4

Install in the reverse order.

Documente menționate