Adjust | |||
1 | Set time on instrument cluster | See Operator's Manual | |
2 | Normalizing power windows | Close all doors and switch on the ignition. Using the switch move each window to the upper end position. In this position press each switch in the power window and outside mirror adjustment switch group, driver (S20/1) for at least 1 s. | |
The normalization of the power windows procedure is also available in the operator's manual. | |||
3 | Normalize the power glass tilting/sliding roof | Only vehicles with power glass tilting/sliding roof, code 414. | |
Switch on ignition. Use switch to move power glass tilting/sliding roof to raised position, until the maximum raised position is reached. Keep the switch pressed when in this position for approximately one second. Actuate the express function (as described in the operator's manual) by briefly pressing the switch (beyond point of resistance). If the power glass tilting/sliding roof is then fully opened, the normalization was successful. If necessary, repeat the procedure. | |||
The normalization of the power glass tilting/sliding roof procedure is also available in the operator's manual. | |||
4 | Normalize 3rd seat row power windows | If installed. | |
See Operator's Manual | |||
5 | Calibrating the compass | If installed. | |
See Operator's Manual |