ar0018t0001b

Compressed-air tank removal and installation

Tip ar · temă 00.18 · versiune 0102 · 2005-07-12

Valabil pentru: MODELS NMB613.355 /358 /388 /455 /485

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 0 Total › 00 Autovehicul în ansamblu › 00.18 Sistem pneumatic autovehicul — Seria 613 (modele 355, 358, 388, 455, 485)

EinPAS 21 Frâne/instalație vacuum/instalație de aer comprimat › 21.35 Instalație de aer comprimat › 21.35.60 Rezervor de aer comprimat — Seria 613 (modele 355, 358, 388, 455, 485)

AR00.18-T-0001B

Compressed-air tank removal and installation

21.3.00

MODELS NMB613.355 /358 /388 /455 /485

Compressed-air tank removal and installation

T00.18-0001-04

Air tank locations

X Direction of travel

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle.

Use hydraulic floor jacks to raise the vehicle at the jacking points provided, then support with jacks.

AR00.60-T-1000B

2

Blow off compressed-air system's supply air

3

Remove underbody cladding

Only necessary when removing compressed air reservoir in front of front axle.

AR61.45-T-1000-01B

4

Detach connector for compressed air lines of compressed air reservoir

For"VOSS 230" compressed-air
connector.

AR42.10-W-0900A

For "VOSS 232" (NG 8, NG 12)
or "Schäfer SDF" (NG 6) compressed-air connector.

AR42.10-W-0900C

5

Detach bracket for compressed air reservoir

6

Remove compressed-air tank

7

Install in the reverse order

Documente menționate