P83.10-2158-06
Shows model 220
1 Wiper system
2 Water repellent piece
3 Air/water duct
4 Reed valve
5 Rod
| Clean | ||
1 | Clean reed valve (4) in air/water duct (3) | Guide rod (5) carefully into the reed valve (4), in order to avoid paint damage to the body below the reed valve (4). | |
Use a rod (5) made of wood, plastic or metal measuring 500 mm in length. Round off the ends of the rod. | |||
Open bonded lamella of reed valve (4) and clean; to do this, insert rod (5) from above through the grid in the reed valve (4). |