Disconnect/connect fuel line connector

Tip ap · temă 47.25 · versiune 0106 · 2011-08-29

Valabil pentru: ENGINE 611.980 in MODEL 638 ENGINE 611.981 /987 in MODEL 901, 902, 903, 904 ENGINE 612.981 in MODEL 902, 903, 904, 905 ENGINE 611.983 in MODEL 690.6, 903, 904 ENGINE 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 47 Instalaţie de alimentare cu combustibil, alimentare cu energie electrică grup motopropulsor › 47.25 Cabluri, furtunuri — Seria 611 (modele 980, 981, 983, 987) · Seria 638 · Seria 690 (modele 6**) · Seria 901 · Seria 902 · Seria 903 · Seria 904 · Seria 905

EinPAS 16 Motor alimentare carburant/Motor alimentare energie › 16.10 Alimentare cu combustibil › 16.10.13 Conductă/Furtun/Supapă — Seria 611 (modele 980, 981, 983, 987) · Seria 638 · Seria 690 (modele 6**) · Seria 901 · Seria 902 · Seria 903 · Seria 904 · Seria 905

Valabil și pentru motoare/cutii de viteze: 612 981

AP47.25-D-0780-01A

Disconnect/connect fuel line connector

1 Push release arm (1) to release position (A) as far as the stop.

2 Separate connector of fuel line.

3 Immediately pull release arm (1) back to assembly position (B) as far as the stop.

 The release arms (1) must not be left in the release position (a) for a long time. Connectors left in the release position (A) for lengthy periods may leak and must be replaced.

4 Insert connector into connection in assembly position (B).

5 Check connectors for tight seating and leaks.

A Release position

B Assembly position

N47.25-2001-03