ap4720p0780rx

Replace fuel filter

Tip ap · temă 47.20 · versiune 0101 · 2007-11-26

Valabil pentru: ENGINES 156, 272, 273 in MODEL 230

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 47 Instalaţie de alimentare cu combustibil, alimentare cu energie electrică grup motopropulsor › 47.20 Pompă de combustibil, filtru — Seria 156 · Seria 230

EinPAS 16 Motor alimentare carburant/Motor alimentare energie › 16.10 Alimentare cu combustibil › 16.10.41 Filtru/Separator de apă — Seria 156 · Seria 230

Valabil și pentru motoare/cutii de viteze: 272 ***, 273 ***

AP47.20-P-0780RX

Replace fuel filter

21.11.07

ENGINES 156, 272, 273 in MODEL 230

Replace fuel filter

P47.20-2291-06

1 Fuel hose

2 Degassing hose

3 Fuel filter

4 Retaining plate

A CLIC clamp

Remove/install/replace

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Switch off ignition

2

Open fuel filler flap and open filler cap and reseal

in order to reduce the pressure in the fuel tank.

3

Raise vehicle with vehicle lift

The fuel filter (3) is mounted on the frame floor assembly above the left rear axle shaft.

4

Pinch-off fuel hoses (1)

Clamping device

*000589403700

5

Open CLIC-clamps (A) and detach fuel hoses (1) as well as degassing hose (2) from fuel filter (3)

Installation: Replace the CLIC clamps (A). Never use screw and nut clamps or spring bracket clamps, as air-tightness will be lost.

Collect any escaping fuel with an absorbent rag.

Installation: Check fuel hoses (1) and degassing hose (2) for damage, replace if necessary.

6

Remove retainer (4) of fuel filter (3)

7

Remove fuel filter (3) from retainer (4)

Installation: Mount the rubber rings attached to the fuel filter (3) on the new fuel filter (3), otherwise there will be contact corrosion and noise development.

Installation: Replace fuel filter (3).

8

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Start engine and check fuel system for leaks

Replace fuel filter

000 589 40 37 00

Clamping device

Documente menționate