ap4700b172001d

Bleed fuel system

Tip ap · temă 47.00 · versiune 0202 · 2019-10-17

Valabil pentru: Engine 457.9 in model 382, 634, 685 Engine 457.9 in model 693, 695, 696, 958 Engine 457.9 in model 695 Engine 457.9, 460.984 in model 934.241/251, 938.14 Engine 460.9 in model 963 Engine 541.976 in model 936.315

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 47 Instalaţie de alimentare cu combustibil, alimentare cu energie electrică grup motopropulsor › 47.00 Generalităţi — Seria 382 · Seria 460 (modele 9**, 984) · Seria 634 · Seria 685 · Seria 693 · Seria 695 · Seria 696 · Seria 934 (modele 241, 251) · Seria 936 (modele 315) · Seria 938 (modele 14*) · Seria 958 · Seria 963

EinPAS 16 Motor alimentare carburant/Motor alimentare energie › 16.10 Alimentare cu combustibil › 16.10.1 Informaţie de bază — Seria 382 · Seria 460 (modele 9**, 984) · Seria 634 · Seria 685 · Seria 693 · Seria 695 · Seria 696 · Seria 934 (modele 241, 251) · Seria 936 (modele 315) · Seria 938 (modele 14*) · Seria 958 · Seria 963

Valabil și pentru motoare/cutii de viteze: 457 9**, 541 976

AP47.00-B-1720-01D

Bleed fuel system

Engine

457.9 in model 382, 634, 685

Engine

457.9 in model 693, 695, 696, 958

Engine

457.9 in model 695

Engine

457.9, 460.984 in model 934.241/251, 938.14

Engine

460.9 in model 963

Engine

541.976 in model 936.315

Bleed fuel system

Engine 457.9, 460.9

B47.00-0003-01

Bleed fuel system

It is not necessary to loosen or disconnect the connections and pipings in order to bleed the fuel system.

Pump the fuel, acting on the hand pump handle (1) until you notice a strong resistance generated by system pressure raise.

Activate engine start, but do not press the accelerator. If engine does not start within 20 seconds, interrupt the start actuation and wait at least one minute before trying again. If the engine does not start, repeat the bleeding operation.

Allow engine to run for about one minute in order to completely eliminate the air from the system through self-bleeding process

B47.00-0016-01