ap4210p4251ff

Check lining thickness of brake pads and condition of brake disks

Tip ap · temă 42.10 · versiune 0104 · 2006-03-21

Valabil pentru: MODEL 454.0

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 42 Sistem hidraulic frâne şi sistem mecanic › 42.10 Frână de serviciu — Seria 454 (modele 0**)

EinPAS 21 Frâne/instalație vacuum/instalație de aer comprimat › 21.15 Frână de serviciu/instalație vacuum › 21.15.40 Frână de serviciu față — Seria 454 (modele 0**)

EinPAS 21 Frâne/instalație vacuum/instalație de aer comprimat › 21.15 Frână de serviciu/instalație vacuum › 21.15.42 Frână de serviciu spate — Seria 454 (modele 0**)

AP42.10-P-4251FF

Check lining thickness of brake pads and condition of brake disks

7.10.03

MODEL 454.0

Check lining thickness of brake pads and condition of brake disks

P42.10-2529-11

Shown on front axle

1 Brake disk

2 Brake pads

Check

1

Check lining thickness of brake pads (2) on the front and rear axle

Check brake pads when installed (2). Observe recommended service limit so that service limit is not dropped below up to the next maintenance service.

If necessary:

Replace brake pads (2)

- subject to separate repair order.

Replacing and installing brake pads

Front axle

AR42.10-P-0170FF

Rear axle

AR42.10-P-0170FG

2

Check brake disk (1) on front and rear axle for score marks and cracks

If necessary:

Replace brake disk (1)

- subject to separate repair order.

Remove/install front axle brake disk

AR42.10-P-0230FF

Removing and installing rear axle brake disc

AR42.10-P-0240FF

Documente menționate