ap4110d4150a

Propeller shafts - inspect play and wear of joints and sliding joints

Tip ap · temă 41.10 · versiune 0104 · 2006-11-29

Valabil pentru: MODEL 667, 668, 670 with ENGINE 602 MODEL 668, 670 with ENGINE 904 MODEL 668, 670 with ENGINE 900.9

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 41 Arbore cardanic › 41.10 Arbore cardanic — Seria 602 · Seria 667 · Seria 668 · Seria 670 · Seria 900 (modele 9**) · Seria 904

EinPAS 17 Grup motopropulsor/Punte › 17.40 Arbore cardanic › 17.40.30 Arbore cardanic dispozitiv de antrenare/tracţiune integrală — Seria 602 · Seria 667 · Seria 668 · Seria 670 · Seria 900 (modele 9**) · Seria 904

AP41.10-D-4150A

Propeller shafts - inspect play and wear of joints and sliding joints

23.4.96

MODEL 667, 668, 670 with ENGINE 602

MODEL 668, 670 with ENGINE 904

MODEL 668, 670 with ENGINE 900.9

Propeller shafts - inspect play and wear of joints and sliding joints

N41.10-0266-01

	Check
1	Move universal joints backwards and forwards in both directions	 Move universal joints backwards and forwards in both directions of cross-piece and in direction of rotation of propeller shaft.
		The universal joint bearings must not be worn. Slight play is permissible. If necessary, repair universal joints or fit new propeller shaft.
2	Move universal joint backwards and forwards	 Push propeller shaft upwards several times at sliding piece and move backwards and forwards in direction of rotation.
		The sliding joint must not be worn. Slight play is permissible. If necessary, repair sliding piece or fit new propeller shaft.
3	Check to ensure that seals on universal joint bearings and sliding piece are not damaged and are in good condition	 If seals are damaged, repair propeller shaft or fit new propeller shaft.