P33.20-2129-08
7 Support joint
7m Rubber boot
8 Upper transverse control arm
8k Articulated
10m Rubber boot
11 Torsion bar
18 Torque strut
18k Articulated
18m Rubber boot
8m Rubber boot
10 Link rod
10k Articulated
10l Rubber bushing
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer. | |
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities. | Keep body parts and limbs well clear of moving parts. | |
1 | Hoist vehicle with lifting platform until wheels are free | ||
| Lift/jack up vehicle | ||
| Checking | ||
2 | Check rubber boot (7m) on supporting joint (7) for leaks and condition. | If the rubber boot is leaky, cracked or damaged rubber boot (7m), replace supporting joint (7): | |
| Replace supporting joint. | ||
3 | Check rubber boot (18m) on joint (18k) of torque strut (18) for leaks and condition. | If rubber boot (18m) is leaky, cracked, or damaged, install new torque strut (18): | |
| Remove/install torque strut on the front axle. | ||
4 | Check rubber boot (10m) at joint (10k) of link rod (10) of stabilizer bar (11) for leaks and condition. | If rubber boot (10m) is leaky, cracked or damaged, install new joint (10k). | |
5 | Check rubber boot (8m) at joint (8k) of upper transverse control arm (8) for leaks and condition. | If the rubber boot (8m) is leaky, cracked or damaged, replace ball joint (8k) of upper transverse control arm (8): | |
| Remove/install upper transverse control arm | ||
6 | Check supporting joint (7) | Check supporting joint (7) for play by pulling and pushing firmly. In the event of play, replace supporting joint (7): | |
| Replace supporting joint. | ||
7 | Check joint (18k) of torque strut (18). | Check joint (18k) for play by pulling and pushing firmly on the torque strut (18). If play is found, install new torque strut (18): | |
| Remove/install torque strut on the front axle. | ||
8 | Check joint (10k) of link rod (10) of stabilizer bar (11). | Check joint (10k) of link rod (10) for play by pulling and pushing firmly on the stabilizer bar (11). In the event of play, replace ball joint (10k) | |
9 | Check rubber bushing (10l) of link rod (10) of stabilizer bar (11). | Check rubber bushing (10l) of link rod (10) for play by pulling and pushing firmly on the stabilizer bar (11). In the event of play, replace link rod (10) of stabilizer bar (11) | |
10 | Check joint (8k) of upper transverse control arm (8). | ||
| Checking follower joint of steering knuckle mount (installed) | In the event of play, replace joint (8k) of upper transverse control arm (8): | |
| Remove/install upper transverse control arm | ||
11 | Lower vehicle |
Documente menționate
- ar0060p1000tx
- ar3315p0160tx
- ar3320p0426tx
- ar3320p0440tx Înlocuirea suportului de articulaţie
- ar3320p0500tx
- as0000z000901a Pericol de rănire prin prinderea sau strivirea, în caz extrem prin tăierea membrelor în timpul manipulării sistemului mecanic
- as0000z001001a Pericol de moarte prin alunecare sau basculare a autovehiculului de pe elevator