ap1322b1351a
Inspect poly-V-belt for wear and damage
Tip ap · temă 13.22 · versiune 0201 · 2019-10-25
Valabil pentru: Engine 904.9, 906.9 in model 368, 382, 384 Engine 924.9, 926.9 in model 368, 382, 384 Engine 926.910 in model 634.001
Nu este disponibil în „ro”; afișat în Engleză.
Încadrare
Grupă funcțională 1 Motor › 13 Compresor aer, transmisie prin curea › 13.22 Acţionare cu o curea — Seria 368 · Seria 382 · Seria 384 · Seria 634 (modele 001) · Seria 904 (modele 9**) · Seria 906 (modele 9**)
EinPAS 15 Motor › 15.18 Antrenare curea › 15.18.30 Curea/Fulie de curea/Dispozitiv de întindere/Rolă de ghidare — Seria 368 · Seria 382 · Seria 384 · Seria 634 (modele 001) · Seria 904 (modele 9**) · Seria 906 (modele 9**)
Valabil și pentru motoare/cutii de viteze: 924 9**, 926 9**, 926 910
AP13.22-B-1351A
| Inspect poly-V-belt for wear and damage
| 16.10.2019
|
Engine
| 904.9, 906.9 in model 368, 382, 384
|
Engine
| 924.9, 926.9 in model 368, 382, 384
|
Engine
| 926.910 in model 634.001
|
1
| Water pump pulley
|
2
| Anti-vibration pulley
|
3
| Alternator's pulley
|
4
| Tensioning roller
|
1
| Water pump pulley
|
2
| Anti-vibration pulley
|
3
| Alternator's pulley
|
4
| Tensioning roller
|
5
| Tensioning roller
|
| Check
|
|
|
1
| Open the engine access cover
| Refer to the body makers instructions.
|
|
|
|
| Access to perform the maintenance and repairs varies according to the bodywork type/manufacturer of the bodywork.
|
|
2
| Remove inspection hole cover on timing case and install turning device
|
|
|
|
|
| Engine 904.9, 906.9 in model 368, 382, 384
Engine 924.9, 926.9 in model 368, 382, 384
Engine 926.910 in model 634.001
Turning device
| *904589046300
|
3
| Turn the engine step by step with the engine turning device , examining the entire perimeter of the drive belt for wear or damage
| Deterioration aspects of the Poly-V drive belt.
|
|
|
|
| Damage profiles for a poly-V belt
| AP13.22-B-1351-01A
|
|
|
| Replace the worn or damaged drive belt.
|
|
|
|
| The belt tension and deflection is automatically corrected.
|
|
|
|
|
Turning device
| *904589046300
|
4
| Remove the turning device and install the inspection hole cover of the engine housing
|
|
|
Documente menționate
