AP09.10-P-0980AL | Replace air filter element | 23.4.08 |
ENGINES 640.942 in MODEL 169.006 /306
ENGINES 640.940 in MODEL 169.007 /307, 245.207
ENGINES 640.941 in MODEL 169.008 /308, 245.208
P09.10-2106-08
Illustrated on model 169
1 Charge air hose
4 Air filter element
B2/5 Hot film mass air flow sensor
2 Top section of air filter housing
2a Screw
3 Bottom section of air filter housing
Modification notes
| Remove/install | ||
| Notes on avoiding damage through contamination and foreign objects | ||
1 | Open engine hood | ||
2 | Detach the charge air hose (1) at the hot film mass air flow sensor (B2/5) | ||
3 | Loosen screws (2a) | The screws (2a) remain in the top section of the air filter housing (2). | |
| |||
4 | Remove the top section of the air filter housing (2) | Do not detach the electrical connector at the hot film mass air flow sensor (B2/5). Place the top section of the air filter housing (2) in the engine compartment. | |
Lift the top section of the air filter housing (2) in the front and pull it out from the guides of the top section of the air filter housing (3) at the back. | |||
5 | Take out air cartridge (4) | Replace air filter element (4), do not clean | |
| Clean | ||
6 | Clean the top section (2) and the bottom section (3) of the air filter housing from inside | Cleaner from package | |
7 | Install in the reverse order | Installation: Check the charge air hose (1) on the turbocharger for firm seating. |
Air filter
Number | Designation | Engine | ||
BA09.10-P-1001-01F | Bolt, air filter housing top section to air filter housing bottom section | Nm | 4 | |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1028-04A | Cleaner from package | Adolf Würth GmbH & Co. KG |
Documente menționate
- ah0000p500001a Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor străine