ap0020t0022a

Lubricate rim bearing

Tip ap · temă 00.20 · versiune 0102 · 2005-07-12

Valabil pentru: MODEL 671.3

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 0 Total › 00 Autovehicul în ansamblu › 00.20 Revizie, sisteme de revizie (FSS, ASSYST) — Seria 671 (modele 3**)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.55 Sistem de articulaţii/Coroană dinţată › 35.55.40 Coroană dinţată — Seria 671 (modele 3**)

AP00.20-T-0022A

Lubricate rim bearing

1.12.98

MODEL 671.3

Lubricate rim bearing

T55.50-0026-01

1 Grease nipple

2 Sight glass

Lubricate rim bearing

T55.50-0019-11

3 Grease nipple

Only use high-pressure grease guns that do not exceed a pressure of 40 bar for greasing the lubricating nipple

1

Continue greasing lubricating nipples (1) until the check pin is fully visible in the inspection glass (2)

Do not interrupt lubricating operation until the check pin is fully visible. After completing the lubricating operation, the check pin moves back into its initial position.

Specified grease qualities and approved grades of grease conforming to Specifications for Service Products

Sheet 267.0

BB00.40-P-0267-00A

Cleaning

2

Clean lubricating nipples (3) with a cleaning cloth

3

Grease lubricating nipples (3)

Multi-purpose grease according to Specifications for Service Products

Sheet 267.0

BB00.40-P-0267-00A

After lubricating, remove any grease which has escaped.

4

Lubricate locks, hinges, bearings, joints, levers, fork ends, control cables and maintenance flaps with grease (loose) or oil (can)

Documente menționate