ap0020p0051a

All lines and hoses, sensor cables - checking tightness and condition

Tip ap · temă 00.20 · versiune 0105 · 2008-08-06

Valabil pentru: MODEL 460 MODEL 461.217 /219 /223 /227 /229 /238 /239 /249 /266 /267 /302 /321 /322 /323 /326 /327 /328 /329 /331 /332 /335 /336 /337 /338 /341 /342 /345 /365 /366 /367 /368 /401 /402 /403 /404 /405 /450 /451 /452 /454 /455 /456 /458 /459 MODEL 463.200 /202 /204 /206 /207 /208 /209 /220 /221 /222 /224 /225 /227 /228 /230 /231 /232 /233 /236 /237 /240 /241 /243 /244 /245 /246 /247 /248 /249 /250 /254 /270 /271 /300 /303 /304 /307 /308 /309 /320 /321 /322 /323 /324 /325 /327 /328 /330 /331 /332 /333 /34

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 0 Total › 00 Autovehicul în ansamblu › 00.20 Revizie, sisteme de revizie (FSS, ASSYST) — Seria 460 · Seria 461 (modele 217, 219, 227, 229, 238, 239, 249, 266, 267, 302, 321, 322, 323, 326, 327, 328, 329, 331, 332, 335, 336, 337, 338, 341, 342, 345, 365, 366, 367, 368, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Seria 463 (modele 200, 202, 204, 206, 207, 208, 209, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 236, 237, 240, 241, 243, 244, 245, 246, 247, 248, 249, 250, 254, 270, 271, 300, 303, 304, 307, 308, 309, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 340, 341)

EinPAS 45 Date/Informaţie › 45.10 Întregul autovehicul › 45.10.20 Întregul autovehicul — Seria 460 · Seria 461 (modele 217, 219, 227, 229, 238, 239, 249, 266, 267, 302, 321, 322, 323, 326, 327, 328, 329, 331, 332, 335, 336, 337, 338, 341, 342, 345, 365, 366, 367, 368, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Seria 463 (modele 200, 202, 204, 206, 207, 208, 209, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 236, 237, 240, 241, 243, 244, 245, 246, 247, 248, 249, 250, 254, 270, 271, 300, 303, 304, 307, 308, 309, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 340, 341)

AP00.20-P-0051A

All lines and hoses, sensor cables - checking tightness and condition

22.7.08

MODEL 460

MODEL 461.217 /219 /223 /227 /229 /238 /239 /249 /266 /267 /302 /321 /322 /323 /326 /327 /328 /329 /331 /332 /335 /336 /337 /338 /341 /342 /345 /365 /366 /367 /368 /401 /402 /403 /404 /405 /450 /451 /452 /454 /455 /456 /458 /459

MODEL 463.200 /202 /204 /206 /207 /208 /209 /220 /221 /222 /224 /225 /227 /228 /230 /231 /232 /233 /236 /237 /240 /241 /243 /244 /245 /246 /247 /248 /249 /250 /254 /270 /271 /300 /303 /304 /307 /308 /309 /320 /321 /322 /323 /324 /325 /327 /328 /330 /331 /332 /333 /340 /341

Checking

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

1

Raise vehicle with vehicle lift

Lift/jack up vehicle

AR00.60-P-1000G

2

On all the major assemblies in the vehicle, check lines, hoses and sensor cables for leaks and damage by visual inspection and by listening

Pay attention to chafe-free routing and fixings in accordance with the specifications.

3

Check condition of rubber spacers on brake hoses

Replace brake hoses with damaged or missing rubber spacers.

4

Check routing of brake hoses on front axle

The distance between coil spring and brake hose must be at least 20 mm for each wheel position, if necessary correct the setting:

To do this, loosen the brake line at the brake hose bracket, twist the brake hose correspondingly and tighten the brake line again.

5

Bleed brake system

After releasing the brake hose.

Except model 463.270/ 271 and model 463.248/ 236 with code (979) Special protection version

AR42.10-P-0010GG

Model 463.248/ 236 with code (979) Special protection version

AR42.10-P-0010GS

Model 463.270 /271

AR42.10-P-0010GX

6

Lower vehicle

Documente menționate