ap0020m0051b

All lines and hoses, sensor cables - checking tightness and condition

Tip ap · temă 00.20 · versiune 0102 · 2005-09-29

Valabil pentru: MODEL 903.662 Sprinter Eco minibus MODEL 903.662 Sprinter Group minibus MODEL 903.662 Sprinter Mobility minibus MODEL 903.663 Sprinter Eco minibus MODEL 903.663 Sprinter Group minibus MODEL 903.663 Sprinter Mobility minibus MODEL 904.663 Sprinter Eco minibus MODEL 904.663 Sprinter Group minibus MODEL 904.663 Sprinter Classic minibus MODEL 904.663 Sprinter Tourist minibus MODEL 904.663 Sprinter Low-Floor minibus MODEL 905.613 Sprinter Classic 6 t minibus MODEL 905.613 Sprinter Low-Floor 6 t m

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 0 Total › 00 Autovehicul în ansamblu › 00.20 Revizie, sisteme de revizie (FSS, ASSYST) — Seria 903 (modele 662, 663) · Seria 904 (modele 663) · Seria 905 (modele 613)

EinPAS 45 Date/Informaţie › 45.10 Întregul autovehicul › 45.10.20 Întregul autovehicul — Seria 903 (modele 662, 663) · Seria 904 (modele 663) · Seria 905 (modele 613)

AP00.20-M-0051B

All lines and hoses, sensor cables - checking tightness and condition

1.7.04

MODEL 903.662
Sprinter Eco minibus

MODEL 903.662
Sprinter Group minibus

MODEL 903.662
Sprinter Mobility minibus

MODEL 903.663
Sprinter Eco minibus

MODEL 903.663
Sprinter Group minibus

MODEL 903.663
Sprinter Mobility minibus

MODEL 904.663
Sprinter Eco minibus

MODEL 904.663
Sprinter Group minibus

MODEL 904.663
Sprinter Classic minibus

MODEL 904.663
Sprinter Tourist minibus

MODEL 904.663
Sprinter Low-Floor minibus

MODEL 905.613
Sprinter Classic 6 t minibus

MODEL 905.613
Sprinter Low-Floor 6 t minibus

MODEL 905.613
Sprinter Classic 2+2 - 6.34 t minibus

Check

1

Visually inspect all lines and hoses of brake system and clutch operating system as well as all lines and hoses for oil, fuel, coolant, compressed air and vacuum lines.

Check the lines and hoses for leaks and damage (e.g. corrosion, porosity, chafing marks, kinks, etc.).

If damage or defects are found:

Seal or replace lines and hoses - subject to a separate order.

2

Check that all electrical lines in the engine compartment and on the underbody as well as the connection lines for the ABS sensors and brake lining wear indicators are routed and secured correctly and do not chafe against other components

If damage or defects are found:

Route and secure lines correctly; install new lines if necessary
- subject to separate repair order.

3

Check pressure loss in the compressed air system; release the parking brake before commencing this

Model 904.663, 905.613

Secure vehicle to prevent it moving away.