All lines and hoses, sensor cables - Check leaktightness and condition

AP00.20-B-0051XA

All lines and hoses, sensor cables - Check leaktightness and condition

08.01.2020

Model

368 with engine 904.973/981, 906.998/999, 924.913/925/995/996, 926.950/996

Model

382 with engine 906.918

Model

384 with engine 904.977/978, 924.929/994



Check

1

Carry out a visual inspection on all rigid and flexible pipes of the brake system, as well as all rigid and flexible pipes of the lubricating oil, the clutch activation oil, fuel, coolant and compressed air

 Make sure the pipes are in good conditions. Even if they are in good conditions, inspect for damages and other conditions that impede its use (such as corrosion, porosity, wear by friction, kinks, cracks etc).

If damage or malfunction is found.



Eliminate damages with separate invoicing.

2

Check all rigid and flexible pipes, as well as the ABS sensor cables and that of the brake pad wear indicator for friction points, arrangement and correct fastening

If damage or malfunction is found.



Eliminate damages with separate invoicing.

3

Check for pressures loss in the compressed air system, releasing previously the parking brake

 Shim the wheels to prevent unintentional rolling.

.Maximum permissible loss of pressure in a 10 minute interval

*BE42.10-B-1002-10B

If a considerable pressure loss is detected.



Troubleshoot with separate invoicing.

Service brake

Number

Designation

Model 368.0/1

Model 382.123

BE42.10-B-1002-10B

Maximum permissible loss of pressure in a 10 minute interval

bar

< ou = 0,1

< ou = 0,1

Service brake

Number

Designation

Model 384.2/3

BE42.10-B-1002-10B

Maximum permissible loss of pressure in a 10 minute interval

bar

< ou = 0,1