ap0020b0022a

Lubricate rim bearing

Tip ap · temă 00.20 · versiune 0200 · 2016-02-12

Valabil pentru: Vehicle 382.153 with CODE A00 (Front axle with air suspension)Vehicle 382.154, 382.155, 382.157, 382.158 with CODE A00 (Front axle with air suspension)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 0 Total › 00 Autovehicul în ansamblu › 00.20 Revizie, sisteme de revizie (FSS, ASSYST) — Seria 382 (modele 153, 154, 155, 157, 158)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.55 Sistem de articulaţii/Coroană dinţată › 35.55.40 Coroană dinţată — Seria 382 (modele 153, 154, 155, 157, 158)

AP00.20-B-0022A

Lubricate rim bearing

12.02.16

Vehicle 382.153 with CODE A00 (Front axle with air suspension)

Vehicle 382.154, 382.155, 382.157, 382.158 with CODE A00 (Front axle with air suspension)

Lubricate rim bearing

M55.50-0020-11

Hübner articulation

1 Articulation assembly

2 Distributor

3 Greaser

Lubricate rim bearing

B55.50-0001-01

2 Distributor

3 Greaser

In order to lubricate, use only high pressure pumps that do not exceed a 400 bar pressure

Clean

1

Before greasing, clean thoroughly the sealing laps of the spinning crown and the greaser (arrow) of the lubrication system's distributor (2)

2

Supply the lubrication system by the greaser (3) of the distributor (2) with lubrication grease

The spinning crown can be considered as well lubricated when the new grease starts to flow out by the sealing laps.

General use grease as per auxiliary materials specification.

Refer to S.I. lubricants

3

After greasing, press the sealing laps of the spinning crown and remove the excess grease