an8288w000109d
Prepare console housing for on-board unit for installation and install
Tip an · temă 82.88 · versiune 0200 · 2003-08-15
Valabil pentru: MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## up to 472725 with CODE (F04) Cab L (long) with CODE (DD2) Cab with 1550 mm floor-to-ceiling height except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter) except CODE (DD3) Lowered cab with low roof Mautsystem Fa. Grundig in Fahrzeuge mit Tachograph FTCO MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## up to 472725 with CODE (F05) M-cab (medium-long) exce
Nu este disponibil în „ro”; afișat în Engleză.
Încadrare
Grupă funcțională 3 Suprastructură › 82 Instalaţie electrică, structură › 82.88 Sistem de taxare — Seria 950 (modele 0**, 1**, 2**, 3**) · Seria 952 (modele 0**, 1**, 2**, 3**) · Seria 953 (modele 1**, 3**) · Seria 954 (modele 0**, 1**, 2**)
EinPAS 31 Comunicaţie/Informaţie/Entertainment › 31.35 Tahograf/Sistem de taxare › 31.35.3 Montare ulterioară/Modificare — Seria 950 (modele 0**, 1**, 2**, 3**) · Seria 952 (modele 0**, 1**, 2**, 3**) · Seria 953 (modele 1**, 3**) · Seria 954 (modele 0**, 1**, 2**)
AN82.88-W-0001-09D
| Prepare console housing for on-board unit for installation and install
|
|
|
17.7.03
| Procedure modified
| Steps 1 to 5
|
|
1 Remove protective foil from the support webs (4) of the bracket (3).
2 Insert bracket (3) into the housing box (2) and when doing so guide wiring harness (5) through the bracket (3).
3 Position bracket (3) on left and at rear in the housing box (2) and adhere to the bottom of the housing box (2).
4 Connect cover panel to the housing box (2).
5 Insert sheet-metal frame (1) through the opening in the cover panel (6) into the bracket (3) and bend the retainer tabs.
