an6820p0002ec

Retrofit cup holder

Tip an · temă 68.20 · versiune 0103 · 2013-06-28

Valabil pentru: MODEL 207.3##/4## 1# up to 5/13/13 with TRANSMISSION 722.### 1# up to 5/13/13 without CODE 310 (Cup holder) MODEL 207.3##/4## 1# with TRANSMISSION 711.### 1# without CODE 310 (Cup holder)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 68 Echipament interior › 68.20 Consolă centrală — Seria 207 (modele 3**, 4**)

EinPAS 37 Echipament interior › 37.20 Consolă centrală › 37.20.3 Montare ulterioară/Modificare — Seria 207 (modele 3**, 4**)

Valabil și pentru motoare/cutii de viteze: 711 ***, 722 ***

AN68.20-P-0002EC

Retrofit cup holder

18.06.2013

MODEL	207.3##/4## 1# up to 5/13/13 with TRANSMISSION 722.### 1# up to 5/13/13
	without CODE 310 (Cup holder)
MODEL	207.3##/4## 1# with TRANSMISSION 711.### 1#
	without CODE 310 (Cup holder)

Retrofit cup holder

1	Cup holder
2	Roller blind
3	Center console
4	Stowage compartment

P68.20-4187-06

	Remove
1	Slide roller blind (2) of stowage compartment into center console (3) toward rear
2	Remove stowage compartment (4) from stowage compartment in center console (3)	 The stowage compartment (4) is a dispensable part.
	Install
3	Position cup holder (1) above guides (arrows)
4	Push cup holder (1) downward until it arrests audibly on guides (arrows)
5	Close roller blind (2) of stowage compartment in center console (3)
	Check
6	Enter special equipment in online vehicle data card via vehicle documentation system (VeDoc)	 Add:  Code (309) Cup holder
7	Document retrofitted equipment through VeDoc	 Attach note "cup holder retrofitted as per AN68.20-P-0002EC" under field organization texts for design group 68.

Parts ordering note

Part no.	Designation	Quantity
KG99 (siehe EPC)	Cup holder	1