Retrofit pedal covers

AN29.10-P-0002EC

Retrofit pedal covers

27.8.09



Remove

1

Remove accelerator pedal sensor (B37)

 The accelerator pedal sensor (B37) with its pedal cover is no longer required.

AR30.12-P-1321CW

2

Remove rubber support of foot-operated parking brake (4)

 The rubber pedal support of the foot-operated parking brake (4) is no longer required.

3

Remove pedal rubber support of the clutch pedal

Only on vehicles with transmission 711 und 716

 The pedal rubber support of the clutch pedal is no longer required.

4

Remove pedal rubber support of brake pedal (5)

 The pedal rubber support of the brake pedal (5) is no longer required.



Install

5

Install accelerator pedal sensor (B37) with stainless steel support (3)

AR30.12-P-1321CW

6

Attach stainless steel pedal support (1) to the foot-operated parking brake (4) in the lower area (arrow A) and invert clockwise over the foot-operated parking brake (4)

 Do not use any sliding agent and lubricant when installing otherwise the tight seating of the stainless steel pedal support is not guaranteed (1).

7

Attach stainless steel pedal support to clutch pedal in the lower area and invert clockwise over the clutch pedal

Only on vehicles with transmission 711 und 716

 Do not use any sliding agent and lubricant when installing otherwise the tight seating of the stainless steel pedal support is not guaranteed ().

8

Attach stainless steel pedal support (2) to the brake pedal (5) in the lower area (arrow B) and invert clockwise over the foot-operated parking brake (5)

 Do not use any sliding agent and lubricant when installing otherwise the tight seating of the stainless steel pedal support is not guaranteed (2).

Part no.

Designation

Quantity

KG99 (see EPC)

Interior compartment equipment

1