PE83.30-W-2000-60CA | Legend of wiring diagram for air conditioning system | Model 950.0/1/2/3, 952.0/1/2/3, 953.1/3, 954.0/1/2, in vehicles as of production period 1.1.00 with BODY 942.899 with CODE (H03) Air conditioning in front end |
Code | Designation | Coordinates |
A7 | Base module | 6M 25M 42M |
A12 | Heater operating unit | 9A 24A 38A |
A13 | Heater blower unit | 11H |
A21 | Warm water heater unit | 8M |
A26 | Diode holder | 29H |
A61 | Stationary air conditioner control unit | 32M |
B45 | Interior sensor | 39M |
B46 | High-low pressure switch | 34M |
D10-A26 | Diode 10, stationary air conditioner (diode holder A26) | 29G |
F2-A7 | Fuse, instrument illumination, tml. 58 (base module) | 5L 24L |
F3-A7 | Fuse, blower, tml. 30 (base module) | 42L |
F17-A7 | Fuse, blower/auxiliary heater, terminal 15R (base module) | 6L 25L |
P2 | Instrument cluster | 37M |
S43 | Air conditioning switch | 28L |
X1.1 | Cab-chassis connector | 33H 34H 40H 41H |
X2.2 | Cab-chassis connector | 35H |
X3.4 | Cab-chassis connector | 8G |
X13 | Diagnostic socket | 36M |
X26.1 | Rear wall connector | 31H 32H |
Y24 | Heater solenoid valve | 40M |
Y25 | AC compressor | 35L |
(23) | Outside sensor | 19L |
(134) | Blower motor | 14K |
(203) | Activated charcoal filter motor | 21L |
(296) | Temperature control/air conditioning control | 29C |
(307) | Fresh/air recirculation motor | 16K |
(311) | Evaporator sensor | 20L |
(326) | Heat exchanger sensor | 20L |
(350) | Optional depending on version | 30E 30I 32E 33F |
(574) | with stationary air conditioner | 29F 32F |