Repair materials
Number | Designation | Order number |
BR00.45-Z-1032-02A | Adhesive Sikaflex 221 | Sika Deutschland GmbH |
S68.30-4003-01
1 Use rivets provided to rivet retainer plate (1) and angle bracket (2) to form an angle .
S68.30-4002-01
2 Hold perforated plate onto the installation area and align it as far forward as possible.
3 Mark perforated plate contact surfaces in front area at top and bottom (arrows).
4 Set angle section (3) so that the right-hand side-wall reinforcement lies flush with the marked contact surface (arrow).
5 Hold up angle section (3) and bore holes to of 4.2 mm.
Use existing holes in angle section as a bore-hole template.
Remove any bore chips and coat holes with anticorrosion paint.
6 Rivet angle (3) on.
S68.30-4001-01
7 Hold up perforated plate (5) and bore holes to of 4.2 mm.
Use existing holes in perforated plate angle section as a bore-hole template.
Remove any bore chips and coat holes with anticorrosion paint.
8 Remove protective foil (4) in area of perforated plate's (5) holes.
9 Coat contact surface (arrow) of perforated plate on body with adhesive.
10 Use four rivets to attach perforated plate (5), then put the remaining rivets in.