ar9430p5300tx

Remove/install bottom parts of noise encapsulation

Tipo ar · tema 94.30 · versão 0101 · 2007-10-09

Válido para: MODEL 219.322 with ENGINE 642

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 94 Ruídos da carroçaria, isolação acústica › 94.30 Cápsula acústica — Série 219 (modelos 322)

EinPAS 35 Carroçaria/chassi/peças agregadas › 35.25 Elemento isolante/revestimento inferior/vedação/proteção inferior › 35.25.41 Revestimento do lado inferior do assoalho/encapsulamento acústico/proteção inferior — Série 219 (modelos 322)

Também válido para motores/caixas de velocidades: 642 ***

AR94.30-P-5300TX

Remove/install bottom parts of noise encapsulation

8.4.05

MODEL 219.322 with ENGINE 642

Remove/install bottom parts of noise encapsulation

P94.30-2014-05

Bottom pat of front noise encapsulation

1 Bolt

2 Rubber lip

Remove/install bottom parts of noise encapsulation

P94.30-2015-05

Bottom part of middle noise encapsulation

1 Bolt

Remove/install bottom parts of noise encapsulation

P94.30-2016-05

bottom part of rear noise encapsulation

1 Bolt

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle with lifting platform

AR00.60-P-1000TX

2

Take out screws (1) and take off bottom parts of noise encapsulation

Observe removal sequence for noise encapsulation bottom sections: First remove bottom part of middle noise encapsulation.

Installation: Install bottom part of front noise encapsulation in such a way that the rubber lips (2) are concealed by the bumper.

3

Install in the reverse order

Documentos referenciados