P91.40-2562-09
1 Screw
2 Bolts
3 Expansion clip
4 Rear shelf
R12/6 Left rear ETR squib
R12/7 Right rear ETR squib
5 Screw
6 Automatic belt retractor with ETR
7 Bracket
8 Screw
9 Seat belt
Modification notes
| Remove/install | ||
Danger! | Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | |
Danger! | Risk of injury caused by release of spring in the automatic belt retractor is released. | Never disassemble automatic belt retractors. | |
| Notes on performing repair, body work and welding on vehicles with airbags and ETR units | ||
| Assessment of airbag and belt tensioner units in accident vehicles | ||
| Legal requirements on handling and storing airbags and emergency tensioning retractor units | ||
1.1 | Switch off ignition and remove transmitter key | On vehicles without code (889) Keyless go. | |
1.2 | Switch off ignition and remove transmitter key for Keyless-Go out of vehicle and keep outside the range of the transmitter | On vehicles with code (889) Keyless Go. | |
2 | Remove rear heat restraints | ||
3 | Remove rear seat backrest | ||
4 | Remove the screw (1) and remove belt end fitting | | |
5.1 | Remove left antenna amplifier module | Only when removing left automatic belt retractors with emergency tensioning retractor (6). | |
5.2 | Remove right antenna amplifier module | Only when removing right automatic belt retractors with emergency tensioning retractor (6) on vehicles with code (529) HIGH Class Japan or with code (860) TV tuner or with code (889) Keyless-Go. | |
6 | Remove bolts (2) | | |
7 | Remove expansion clips (3) from rear shelf (4) | ||
8 | Lift rear shelf (4) and remove bolt (5) | | |
9 | Disconnect electrical connector at left rear emergency tensioning retractor squib (R12/6) or right rear emergency tensioning retractor squib (R12/7) | ||
10 | Remove automatic belt retractor with emergency tensioning retractor (6) and bracket (7) | ||
11 | Remove seat belt (9) from belt guide in bracket (7) | Installation: Fit seat belt (9) without twisting. | |
12 | Remove bolt (8) and remove automatic belt retractors with emergency tensioning retractor (6) from bracket (7) | If the automatic belt retractor with emergency tensioning retractor (6) is exchanged, the faulty automatic belt retractor with emergency tensioning retractor (6) must be disposed of properly: | |
| Notes on disposing of airbag and emergency tensioning retractor units | ||
Installation: Note different version (left and right) of automatic belt retractors with emergency tensioning retractor (6). Insert automatic belt retractors with emergency tensioning retractor (6) together with guide (arrow) into bracket (7) and bolt in place. | |||
| |||
13 | Install in the reverse order | ||
14 | Check supplemental restraint system (SRS) with the aid of STAR DIAGNOSIS | ||
| Connect STAR DIAGNOSIS and read out fault memory |
Seat belts/emergency tensioning retractors
Documentos referenciados
- ad0000p200004tx Conectar o STAR DIAGNOSE, fazer a leitura da memória de falhas
- ah9100p000201m Indicações para execução de trabalhos de reparos, na carroçaria e solda em veículos equipados com unidades de Airbag ou dos prétensionadores de cintos
- ah9100p000401a Instruções legais sobre manuseio e armazenagem de unidades de Airbag e dos prétensionadores dos cintos
- ah9100p000601b Avaliação das unidades do airbag e dos pré-tensionadores dos cintos em veículos acidentados
- ar8262p8300tx
- ar8262p8300ty
- ar9112p1620tx
- ar9116p1770tx
- as9100z000101a Risco de lesão nos testes ou trabalhos de manutenção nas unidades de Airbag ou dos pré tensionadores de cintos
- as9100z000201a Risco de lesão ao soltar a mola do enrolador automático do cinto de segurança
- os9100p000101a Indicações para a eliminação das unidades do Airbag e dos cintos de segurança