AR91.12-P-1000GI | Remove/install rear seat | 6.6.08 |
MODEL 163.136 /154 /172 as of 1.9.99,
163.113 /128 /157 /174 /175
40% bench seat
P91.12-2126-06
1 Bolts, front of rear seat fastening
2 Bolts, rear of rear seat fastening
4 Seat frame covering
| Remove/install | ||
1 | Remove head restraint | See Operator's Manual | |
2.1 | Remove cover (4) from bottom of rear seat | On 40 % rear seat only. | |
3.1 | Detach plug from seat belt buckle cable | Only with sidebag in the rear (left and right), code 293. | |
4.1 | Remove electric lead attached to seat frame with adhesive tape | Only with sidebag in the rear (left and right), code 293. | |
Installation: Replace adhesive tape. | |||
5 | Remove bolts (1) on front of rear seat fastening | Installation: Replace bolts and nuts with thread locking compound applied. | |
Torx bit set | |||
| |||
6 | Release backrest and tip forward | See Operator's Manual | |
7 | Release seat bench and fold down | See Operator's Manual | |
8 | Remove bolts (2) on rear of rear seat fastening | Installation: Replace bolts and nuts with thread locking compound applied. | |
Torx bit set | |||
| |||
9 | Remove 40 % bench | ||
10 | Install in the reverse order |
Rear seats
Number | Designation | Model 163 Applicable as of 09/99 | |
BA91.12-P-1005-03A | Nut, rear seat console to vehicle floor | Nm | 40 |
Torx bit set
000 589 01 10 00
Documentos referenciados
- ar9112p1100gh Remover e instalar a cobertura no assento traseiro, na parte inferior