P88.40-0243-06
1 Holder
2 Screw
3 Engine hood lock
4 Upper frame cross member
5 Screw
6 Brace
7 Clips
8 Engine hood pull cable
9 Deflector
10 Safety catch
11 Upper section of engine hood lock
12 Stop buffer
13 Screw
14 Handle
15 Clips
16 Retainer
17 Spring
18 Handle
19 Cover
20 Screw
| Removal | ||
1 | Open engine hood | ||
2 | Remove holder (1) on upper frame cross member | ||
3 | Unscrew screws (2) on engine hood lock (3) and upper frame cross member (4) | ||
4 | Unscrew screw (5) on brace (6) | On vehicles with air conditioning, remove auxiliary fan cover | |
5 | Lift upper frame cross member (4), unclip engine hood pull cable (8) and remove upper frame cross member (4) | ||
6 | Unhook engine hood pull cable (8) from engine hood lock and remove engine hood lock upward | On vehicles with anti-theft alarm disconnect electric plug | |
| Installation | ||
7 | Install engine hood lock (3) on upper frame cross member (4) | Grease engine hood lock with MB lubricant paste | |
8 | Hook engine hood pull cable (8) onto engine hood lock (3) | On vehicles with anti-theft alarm connect electric plug | |
9 | Clip engine hood pull cable (8) into upper frame cross member (4) and install upper frame cross member (4) | Route engine hood pull cable carefully | |
10 | Tighten engine hood lock (3) and upper frame cross member (4) with screws (2 and 5) | | |
11 | Install holder (1) on upper frame cross member | ||
12 | Check engine hood lock for proper locking by closing engine hood and pulling upward with a jerk | ||
13 | Release engine hood and ensure that safety catch engages properly on upper frame cross member | ||
14 | Close engine hood | ||
15 | Check engine hood fit | if necessary | |
adjust engine hood |
Engine hood
Documentos referenciados
- ar8840p1000f Abrir o capô do motor, posicioná-lo na vertical, fechar
- ar8840p3020f